01474 705047 during shop opening times
With over 15,000 units sold World Wide and over 1000 units sold throughout the UK and Europe the Aquadyne has proven to be the Number 1 choice in Bead Filtration.With its unique patented design the Aquadyne is the only filter to offer a life time guarantee and perfect water quality and clarity for your Koi.
Whatever the size of your pond the Aquadyne will give the same results everytime!
As the UK Importers and Distributors of the Aquadyne we make sure that our products are tried and tested, so after running an aquadyne on one of our outside ponds and achieving fantastic results in water quality and reduced maintenance we started work on a new show pond.
The work was finished in September 2002 and fitted with an aquadyne 2.2B filter and UV1 unit. It now supports many large Koi including All Japan Show winners! This pond has now been running for 9 years with the same unit, giving the same results with no new parts added.!
If you are looking for a filtration system that gives you unrivalled water quality and low maintenance, then come and see the AQUADYNE working on what is becoming our most talked about show pond. As a Koi Dealer with contacts worldwide we have access to every filtration product available today.
You can see the results of what the Aquadyne filtration system can do for you by checking out our pond section.
Over 15,000 units sold world-wide!
30% Biological Filtration Capacity
The Aquadyne boosts a total biological filtration capacity of approximately 30%. The Dyna~max forced air cleansing allows thorough washing of bead media through a significant increase in turbulence of media prior to backwashing. The forced air washing, completely breaks up the entire media bed and frees all fine materials that may otherwise remain suspended in the media for further biodegrading.
80% Reduced water to backwash
Reduces the water necessary to backwash by as much as 80%. During a normal non air-assisted backwash cycle, the Model 4.4 would typically require between 200 and 300 gallons of water to effectively clean the filter of waste. With the Dyna~max system you can backwash the same filter with as little as 60 gallons of water. This is most desirable for those wishing to install a larger filter on a pond of a lesser volume than the filter is rated for, because very little make-up water has to be added to the pond after a backwash cycle and a much larger fish load can be maintained in a smaller environment, while greatly entending the time between backwashing.
All Aquadyne filter systems have the following high standard features:-
- Power backwash
- Bottom sludge drain
- 5 minute disassembly
- Micro sediment removal
- Simple installation
- Advanced backwash
- Complete medical bypass
